Friday, November 6, 2009

I'm watching you

I need a sensor to determine when the assembly has moved to the beginning. I was thinking of using an optical sensor to do it. Once I've determined the start position, I can just count stepper steps to know where exactly I am in reference to it. To the right is the schematic of the circuit I'm building. I'm using Osram's SFH9315 slotted sensor. It consists of a LED as emitter on one side and a phototransistor as sensor on the other side.

Here's the completed circuit:

Now I just need to figure out how and where to mount it on my table.

And here it is:

Thursday, November 5, 2009

The Force is all around us

I finally got everything machined and connected. Behold, it moves!

It is a bit slow at the moment. Though I can live with this. The motor is specked as having 0.36Nm holding torque. However my drive circuit is pretty primitive and does not squeeze the maximum out of it. I've ordered a driver board that hopefully will get more speed and power. Here's the table in a high resolution photo:

Tuesday, November 3, 2009

Driving a stepper

So I managed to build a circuit to test-run the stepper motor. I used two Allegro A3953 IC-s to drive the two coils of the motor.

The motor is actually a 6-wire motor, ideally driven with a unipolar driver. But as I don't have that I just used halves of the coils and ran it as bipolar.

I got this motor off ebay. It's a 400-stepper, very small, cost me 8€ including shipping.

Vises and vices

I finally got my cross vice (or cross vise for American english). Amazing how these two languages are diverging.

Also I got a few stepper motors I can start playing with now. As I don't really have any experience with them.

I also have a ball screw attached to the rig. I got it a few weeks ago and had the ends machined. Also I got some oldham couplings - that is a way to connect the shaft of the stepper to the shaft of the screw. The black belt to the right is the energy chain.

Monday, October 19, 2009

And the Lord God formed man of the slime of the earth: and breathed into his face the breath of life, and man became a living soul

I finally managed to properly assemble my build platform. The frame is made out of aluminium profile. There's a company around that sells and cuts it to size. Pretty cool stuff to work with. I'd say this is like LEGO for engineers (engineers, not adults:).

At the top left corner you can see a bearing unit. I'm planning on putting the ball screw through it. But at the moment that's still in transit. Plus I need to get its ends machined somewhere.

Saturday, October 10, 2009

Rail, first try

Now that I have drills and stuff I can make some proper holes. And this is the first result. The printing head mounted onto rails.

This video shows it "working". I have yet to construct a platform to mount it to and also I lack the means to propel it back and forth. I'm planning on using a lead screw.

Bench drill

A week ago I tryed to make a hole into a thicker aluminium piece with my makita hand drill. And. I failed spectacularly. The hole was not straight enough so that once I mounted the detail to a motor axel it was just wobbling all over the place.

So I decided to get a bench drill. Most probably a slight overkill but will be useful. Here it is. Optimum's Quantum B14: 350W, 520-2620 RPM.